{"id":10308,"date":"2025-06-14T01:36:38","date_gmt":"2025-06-14T08:36:38","guid":{"rendered":"https:\/\/weami.kr\/?p=10308"},"modified":"2026-02-24T17:09:21","modified_gmt":"2026-02-24T08:09:21","slug":"e99-step-o4","status":"publish","type":"post","link":"https:\/\/weami.kr\/en\/e99-step-o4\/","title":{"rendered":"e99<\/span> sTEP o4"},"content":{"rendered":"\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

e99<\/a><\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

[o4 sTEP]<\/a><\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"e99\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

dEADLINE<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Finalize the brand name, logo, and concept.\u00a0<\/span><\/span>Launch SNS.<\/del><\/span>\u00a0(~4.30)<\/span><\/del><\/p>

Define product categories and begin design.(~5.31)<\/span><\/del><\/p>

Complete all designs and 3D print everything.<\/span>\u00a0(~6.30)\u00a0<\/span><\/del><\/p>

Sign the workshop contract (07.01) -> Register the business, finalize all products (~7.31)<\/p>

LAUNCHING OUR BRAND (8.30)<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

tHOUGHTS<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

This was the original plan\u2026
It\u2019s definitely moving faster than expected.<\/p>\n

<\/p>\n

Once the rubber mold is done, everything is basically finished.
There\u2019s only one original master piece left,
and for that, it\u2019s just a matter of choosing the right resin and handing it over.<\/p>\n

<\/p>\n

Still, the faster the better.
It\u2019s better to identify problems early
than to move slowly and end up scrambling to fix things later.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

pRODUCTS<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Earrings: Orange<\/p>

Rings: Orange, Croissant, Egg<\/p>

Necklaces: Meat, Orange, Pretzel, Pizza<\/p>

The earrings are still a problem.<\/p>

I was planning to include the orange design, but if I want to use epoxy,<\/p>

there are certain conditions that need to be met \u2014
and to meet them, the size becomes larger than I expected.<\/p>

For now, I still have some time, so I\u2019ll keep thinking about it.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t
<\/div>
Prototype o1<\/div><\/div><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

It was my first time using the printer,
and these were the first products that came straight out of my head.<\/p>\n

I used eSUN PLA-PRO resin. They say it has less odor,
but there was still some smell.<\/p>\n

Anyway, the pieces actually came out \u2014 and that alone made me incredibly satisfied.<\/p>\n

I still vividly remember the rush of dopamine.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
Pizza<\/h5>

It was too small. Much smaller than I expected.<\/p>

The details came out more or less the way I had imagined.<\/p>

The flowing cheese was expressed quite well too, but the supports were a problem.<\/p>

There was a pretty high chance of causing damage during post-processing.<\/p>

Meat<\/h5>

Strangely, one of the bones kept collapsing.<\/p>

Even though both sides had the same size, mass, and shape, one side kept breaking.<\/p>

I couldn\u2019t figure out why, and it gave me a bit of trouble.<\/p>

Still, the moment it came out, I thought it looked cute.<\/p>

I was immediately satisfied.<\/p>

But the logo felt too small, so I decided to increase its size.<\/p>

Orange<\/h5>

As for the ring, I liked it immediately after printing it \u2014 just like the meat piece.<\/p>

There wasn\u2019t much to give feedback on.<\/p>

The necklace seemed fine at first as well.<\/p>

But based on feedback from people around me,
it felt a bit too big \u2014 and after looking at it again, I agreed.<\/p>

The logo also felt too small compared to the overall size,
so I decided to reduce the size of the piece instead.<\/p>

Fried egg<\/h5>

While removing the supports, the ring broke as well \u2014
that\u2019s why it ended up like this.<\/p>

Still, I was fairly satisfied.<\/p>

Once a gemstone is set there, it\u2019ll create the perfect focal point.<\/p>

Croissant<\/h5>

The moment it came out, I thought, \u201cOh, it\u2019s cuter than I expected!\u201d<\/p>

But the logo was a bit too small on this ring as well.<\/p>

I had intentionally added a hole with the concept of placing a bandage over it,<\/p>

but it seemed like it would make the post-processing too complicated,<\/p>

so I decided to remove that idea.<\/p>

Pretzel<\/h5>

It came out better than I expected. The twist was expressed well.<\/p>

When I showed it to people,
they suggested that maybe it would be better to go with something like a typical heart-shaped pretzel necklace \u2014
the kind you immediately see when you search \u201cpretzel necklace.\u201d<\/p>

But with this design, I had already won half the battle.
It was different.<\/p>

Still, after looking at it again, the size felt a bit too large,
which reduced the cuteness.<\/p>

So I decided to make it smaller.<\/p>

Overall<\/h5>

Overall, I realized that our product designs shouldn\u2019t exceed 20mm in width.<\/p>

The moment they go beyond that, unless the character itself is undeniably cute,
it becomes too overwhelming for women to wear comfortably.<\/p>

To be honest, \u201ckitsch\u201d doesn\u2019t necessarily mean cute.<\/p>

It\u2019s more of a positive way to describe something tacky, old-fashioned, or worn.<\/p>

But that\u2019s not the important part.<\/p>

In the end, what matters more than the original definition
is the nuance people actually feel when they see it.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t
<\/div>
Prototype o2<\/div><\/div><\/div><\/div>
<\/div>
Prototype o2<\/div><\/div><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\t\t<\/i>\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t
\n\t\t\t\t\t\t\t<\/i>\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

I increased the size of the pizza.
I reduced the size of the orange and the pretzel.
The meat stayed the same.
Overall, I made the logo slightly larger on all pieces.<\/p>

\u00a0<\/p>

For the orange,
I added a bit of depth between the pulp and the outer peel to create more detail.
I also added clasps to everything.
But they didn\u2019t look very good.
I wanted it to feel more like a toy.
So for the third iteration, I decided that design would need to be revised.<\/p>

\u00a0<\/p>

At that point, all that was left was to print using castable resin.
Then I would send it for casting, get the original metal pieces, finish them,
and once the rubber mold was made, it would be done.<\/p>

But there were problems.
The pizza didn\u2019t hang at the angle we wanted when worn as a necklace.
For the orange, if we wanted to use epoxy, the area where it\u2019s applied needed to be flat.
That meant removing the logo and changing it to an assembly structure.
The rest was fine.<\/p>

So I immediately revised the design and decided to print it using castable resin.
For reference, castable resin costs ten times more than what I\u2019ve been using.<\/p>

What I\u2019ve been using is extremely cheap.
And honestly, I also found a very cheap version of castable resin.<\/p>

At that time, I didn\u2019t know.
That cheap things are cheap for a reason.
That resin, when it\u2019s expensive, is expensive for a reason.<\/p>

\u00a0<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t
<\/div>
Prototype o3<\/div><\/div><\/div><\/div>
<\/div>
Result o1<\/div><\/div><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\t\t<\/i>\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t
\n\t\t\t\t\t\t\t<\/i>\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

It was the final test before sending it off for casting.
Strangely, everything came out mirrored.
Fixing the issue wasn\u2019t that difficult, but\u2026
I wasn\u2019t happy about losing an entire day.<\/p>

Technically, this was the third version, but there had already been countless attempts before this.<\/p>

Anyway, I confirmed that it printed well with castable resin.
Once I fixed the mirroring issue and sent it for casting, that part would be done.
Of course, I also adjusted the clasp and the pizza clasp position.<\/p>

But as you can see in the next photo, the casting didn\u2019t come out properly.
The surface came out bubbled and boiled, making it impossible to work on.
The owner was flexible and didn\u2019t charge me, which I really appreciated.<\/p>

At that time, I thought it was purely a curing issue.
But it wasn\u2019t.<\/p>

Still, he gave me another valuable tip.
When making the master piece for the rubber mold, use brass instead of silver to reduce costs.
I was really grateful.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t
<\/div>
Prototype o4<\/div><\/div><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

After buying a modified microwave mercury curing machine, I ran it immediately.
And those were the results.
Let me explain from the left.<\/p>

Most people recommend placing a cup of water inside when using a mercury curing machine.<\/p>

They say it helps with heat transfer and allows the inside to cure properly.
So I placed it in water and ran it for 30 minutes.
It didn\u2019t feel fully cured, so I ran it for another 30 minutes and went home.
But I had also heard that resin absorbs water\u2026<\/p>

After sitting in water all day, the piece turned gray like that.
The pizza next to it also absorbed some water.
It\u2019s transparent, but slightly gray.
So next time, I decided to monitor it closely.<\/p>

I cured the croissant ring next to it.<\/p>

The color wasn\u2019t bad.
That result came from waiting and watching it for an hour.
As soon as it finished \u2014 even while it was still hot \u2014<\/p>

I removed the water immediately and dried it with an air gun.
That was probably the proper curing method.<\/p>

The piece on the far right was cured without water.
I later found out that resin can discolor if it becomes too dry or aged.
So I think that\u2019s why it turned yellow.
It was hot and dry.<\/p>

From what I\u2019ve researched,<\/p>

that discoloration doesn\u2019t necessarily matter when it comes to casting.
That\u2019s according to GPT.<\/p>

So I took those pieces straight to Jongno again.
This time, I tried a different casting shop.
But the moment they saw it, they rejected it.
They said it wouldn\u2019t work.<\/p>

They explained that, like the previous casting attempt,
the surface would boil and come out rough.<\/p>

That\u2019s when I clearly realized the resin itself was the problem.
So I joined an open chat group and purchased resin directly made by the owner.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t
<\/div>
Prototype o5<\/div><\/div><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

I finally found the resin and casting shop I had been searching for,
and the casting came out well.<\/p>\n

If I were to make the master in silver, the cost would be quite high.
So I\u2019m planning to create the master in brass, refine it, and then make the rubber mold from that.<\/p>\n

I found the right resin.
Now all that\u2019s left is to print and hand it over to my acquaintance.
But of course, once I printed it, there were several issues again.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
Meat<\/h5>

Completed.<\/span><\/p>

Pizza<\/h5>

The sprue from the casting was attached right
where the pizza cheese detail was supposed to be visible.<\/p>

So I have to send it back and have it redone.
Next time, I\u2019ll need to clearly explain where the sprue should be placed.<\/p>

Orange<\/h5>

Overall,
it came out fine, but there were air bubbles on the top \u2014
and they were large enough that I have to send it back.<\/p>

Also, the outer part that wraps around the inner section was clogged,
and it was difficult to drill through.
So I revised the design.<\/p>

I increased the overall diameter by about 1mm,
and widened the recessed outer groove inside as well.
I need to minimize casting issues as much as possible.<\/p>

My acquaintance said that whether holes get clogged or not is mostly a matter of luck.
But after printing the rings in resin yesterday,
I could clearly see that even with resin, clogging can happen.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

mY tHOUGHTS uNTIL nOW<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

The 3D printer is still acting up, and defects keep coming out.
Printing failures are common, sure\u2026
But I\u2019m still moving constantly.<\/p>\n

If I had been working a job at the same time,
I probably wouldn\u2019t have made it this far.
I\u2019m living within God\u2019s plan.<\/p>\n

Personally, I just want to buy another 3D printer\u2026
I do have the money, but\u2026 I don\u2019t know. Maybe I can still endure this one.
I don\u2019t want to increase my expenses unnecessarily.
If it\u2019s about money, my partner says I\u2019m moving much faster than expected\u2014
that we don\u2019t really have that kind of margin.<\/p>\n

And honestly, that\u2019s true.
Our goal was to finish the designs by June.
We weren\u2019t planning to be at the casting stage already.
He said by then he\u2019d have more breathing room.<\/p>\n

Anyway, I\u2019m under a lot of stress.
Negative thoughts and positive thoughts are hitting at the same time.
I feel like I\u2019m in chaos.
Everything feels confusing. I don\u2019t know what to do.
I tell myself I\u2019m relying on God, praying, living inside His plan \u2014<\/p>\n

that everything is learning and realization.<\/p>\n

And at the same time, I find myself thinking\u2026
Wouldn\u2019t it just be easier to die? Wouldn\u2019t that be more comfortable?
This is fucking brutal.
I usually don\u2019t swear.
But I don\u2019t even know how else to describe this situation.<\/p>\n

And strangely enough, what\u2019s interesting is \u2014
I\u2019m not thinking, \u201cCan I do this?\u201d or \u201cWhat if I fail?\u201d
I don\u2019t think that way
Yes, it\u2019s true \u2014 I have nowhere to retreat.
I\u2019m standing at the edge of a cliff.
But I keep pushing myself, telling myself,
\u201cI will make it.\u201d<\/p>\n

I haven\u2019t even started yet. I haven\u2019t even tied my shoelaces.
Maybe I\u2019ve just bent down slightly.
No \u2014 not even that. I haven\u2019t stepped onto the field.<\/p>\n

I\u2019m still just training.
And I\u2019m confused about whether this is the right direction or the wrong one.<\/p>\n

But that\u2019s not even my decision.
I just do it.
My body just moves.
My mind just keeps turning.<\/p>\n

I don\u2019t even ask myself \u201cwhy\u201d anymore.
The word \u201cwhy\u201d doesn\u2019t come up.<\/p>\n

I just do it.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

wHAT'S mY nEXT sTEP?<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Refine earrings.<\/p>

Master 3D printing.<\/span><\/del><\/p>

Secure manufacturing.<\/p>

Formalize the business.<\/span><\/del><\/p>

Protect the brand.<\/p>

Build the platform.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\n\t\t\t
\"E99\"<\/div>\n\t\t<\/a>\n\t\t\t\t
\n\t\t\t\t

\n\t\t\t\n\t\t\t\te99<\/span> eND\t\t\t<\/a>\n\t\t<\/h3>\n\t\t\t\t
\n\t\t\t\t\t\n\t\t\t12\/31\/2025\t\t<\/span>\n\t\t\t\t\n\t\t\tNo Comments\t\t<\/span>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/article>\n\t\t\t\t
\n\t\t\t\t\n\t\t\t
\"e99\"<\/div>\n\t\t<\/a>\n\t\t\t\t
\n\t\t\t\t

\n\t\t\t\n\t\t\t\te99<\/span> sTEP o5\t\t\t<\/a>\n\t\t<\/h3>\n\t\t\t\t
\n\t\t\t\t\t\n\t\t\t10\/02\/2025\t\t<\/span>\n\t\t\t\t\n\t\t\tNo Comments\t\t<\/span>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/article>\n\t\t\t\t
\n\t\t\t\t\n\t\t\t
\"\"<\/div>\n\t\t<\/a>\n\t\t\t\t
\n\t\t\t\t

\n\t\t\t\n\t\t\t\te99<\/span> sTEP o4\t\t\t<\/a>\n\t\t<\/h3>\n\t\t\t\t
\n\t\t\t\t\t\n\t\t\t06\/14\/2025\t\t<\/span>\n\t\t\t\t\n\t\t\tNo Comments\t\t<\/span>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/article>\n\t\t\t\t
\n\t\t\t\t\n\t\t\t
\"e99\"<\/div>\n\t\t<\/a>\n\t\t\t\t
\n\t\t\t\t

\n\t\t\t\n\t\t\t\te99<\/span> sTEP o3\t\t\t<\/a>\n\t\t<\/h3>\n\t\t\t\t
\n\t\t\t\t\t\n\t\t\t05\/13\/2025\t\t<\/span>\n\t\t\t\t\n\t\t\tNo Comments\t\t<\/span>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/article>\n\t\t\t\t
\n\t\t\t\t\n\t\t\t
\"e99\"<\/div>\n\t\t<\/a>\n\t\t\t\t
\n\t\t\t\t

\n\t\t\t\n\t\t\t\te99<\/span> sTEP o2\t\t\t<\/a>\n\t\t<\/h3>\n\t\t\t\t
\n\t\t\t\t\t\n\t\t\t04\/17\/2025\t\t<\/span>\n\t\t\t\t\n\t\t\tNo Comments\t\t<\/span>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/article>\n\t\t\t\t
\n\t\t\t\t\n\t\t\t
\"e99\"<\/div>\n\t\t<\/a>\n\t\t\t\t
\n\t\t\t\t

\n\t\t\t\n\t\t\t\te99<\/span> sTEP o1\t\t\t<\/a>\n\t\t<\/h3>\n\t\t\t\t
\n\t\t\t\t\t\n\t\t\t04\/11\/2025\t\t<\/span>\n\t\t\t\t\n\t\t\tNo Comments\t\t<\/span>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/article>\n\t\t\t\t<\/div>\n\t\t\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

This was the original plan\u2026
\nIt\u2019s definitely moving faster than expected.<\/p>\n

Once the rubber mold is done, everything is basically finished.
\nThere\u2019s only one original master piece left,
\nand for that, it\u2019s just a matter of choosing the right resin and handing it over.<\/p>","protected":false},"author":1,"featured_media":10329,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[148,1],"tags":[],"class_list":["post-10308","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-launchingmybrand","category-journey"],"_links":{"self":[{"href":"https:\/\/weami.kr\/en\/wp-json\/wp\/v2\/posts\/10308","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/weami.kr\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/weami.kr\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/weami.kr\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/weami.kr\/en\/wp-json\/wp\/v2\/comments?post=10308"}],"version-history":[{"count":0,"href":"https:\/\/weami.kr\/en\/wp-json\/wp\/v2\/posts\/10308\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/weami.kr\/en\/wp-json\/wp\/v2\/media\/10329"}],"wp:attachment":[{"href":"https:\/\/weami.kr\/en\/wp-json\/wp\/v2\/media?parent=10308"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/weami.kr\/en\/wp-json\/wp\/v2\/categories?post=10308"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/weami.kr\/en\/wp-json\/wp\/v2\/tags?post=10308"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}